Kitchen cabinet dimensions and sizes guide

Explore this kitchen cabinet sizes and dimensions guide. To help you create just the right kitchen look (or at least better understand what you’re looking at when it comes to kitchen cabinet dimensions and all the different sizes and shapes that go along.

Kitchen cabinet dimensions and sizes guide

Kitchen Cabinet Dimensions

Standard cabinet sizes are generous because they help you better understand what you’re doing and how you should measure your kitchen out. But they aren’t entirely set in stone. That’s because you can always get custom cabinets that are the exact right size for your kitchen. If you’re looking to save some money, however, choosing cabinet sizes that are more basic and normal can be a great benefit. It’s going to help you order from in-stock options too, which means it’s going to save you time, but we’ll talk more about that later.

 

Upper Cabinet Sizes

The upper cabinets are where you’ll likely store things like glasses, bowls, and plates. You want cabinets that are large enough to hold all of the things you need, but you don’t want them to be too large because they can take over the entire space in your kitchen. You want the right balance of room for the cabinets and openness so you can feel comfortable and happier in your kitchen. Too many cabinets make that difficult, but you’ll find a whole lot more information about your upper cabinet sizes here.

 

Kitchen Cabinet Height

The upper kitchen cabinet height is quite variable. Different manufacturers consider different heights as being ‘standard cabinet height.’ What this means is you can find a range of different sizes to fit your needs. In general, you’ll find cabinets that are 12, 30, or 36 inches tall. If you have a small kitchen, you will use the smaller cabinets, while a larger kitchen will allow for the taller cabinets instead.

 

Kitchen Cabinet Depth

When it comes to the standard cabinet depth of an upper or wall cabinet, you’ll find there is only one. While you can opt for custom cabinets, the average cabinet depth is 12 inches. This provides plenty of space to put all of your belongings that need to be stored. It also leaves plenty of open space in the kitchen by not sticking too far out of the wall. This is important because you want room above the base cabinets that you will be using. You will be able to lean over the counters needed to work on meals or anything else.

 

Standard Cabinet Widths

So what about the standard cabinet sizes for width? The width on a wall cabinet is the only aspect that is similar or identical to that of a base cabinet. You may find something that is 12, 15, 18, 24, 30, or 36 inches wide. This provides plenty of space for the items you want to store and also offers a good range of sizes so you can match things up nicely in your kitchen. With these different sizes, you’ll be able to create a system that fits in whatever amount of space you may have. You’ll also be able to keep enough room for your overall comfort.

 

Base Cabinet Sizes

So now that we know what it takes to get a good wall cabinet or upper cabinet, you’re going to want your base cabinet sizes figured out as well. That way, you’re going to have the right balance of upper and lower cabinets. You’ll also have plenty of space for things like pots and pans or baking dishes. By getting a good size for these cabinets, you’ll also create everything you could need to make your kitchen look great as well. You can get just enough of them because there are plenty of different sizes and options to go.

 

Standard Cabinet Height for Base Cabinets

Standard kitchen cabinet height for base cabinets is relatively standard. At 34.5 inches without countertops, these cabinets are just tall enough that you can quickly get into them when needed, and you can also easily use the tops of them. If you want to stand at the counter and prepare a meal or work on a project even, you’ll be able to do so comfortably at this standard cabinet height. It’s comfortable for the average person and works well for short or tall, in most cases, at least. If you are much shorter or taller than average, it may not be quite as good of a choice, however.

 

Standard Base Cabinet Depth

The average cabinet depth is 24 inches, and this is what you will find with nearly every base cabinet. While you can find a variety of sizes, otherwise, the depth is primarily set. This provides you the most space for all of the things that you need. In general, it will give you enough space to make sure you can improve your overall kitchen. These cabinets being the same depth ensures that you have a smooth design for the entire room. The most important thing is that they all look uniform, after all. But remember, you can have custom depth as well.

 

Standard Cabinet Widths

The width of a cabinet is essential, but it’s variable with base cabinets as well as with uppers. They each come in sizes including 12, 15, 18, 24, 30, and 36 inches. Though, of course, you can adjust these sizes as you like with custom sizes. Each manufacturer will generally offer sizes to your specifications and will also several different widths so you can mix and match them to your specifications. If you want a lot of smaller cabinets or a few larger ones, you can choose yourself to get the right kitchen design.

 

Designing Your Kitchen Cabinets

Once you’ve determined the correct kitchen base cabinet dimensions and upper cabinet dimensions, you’ll be prepared to create a design that uses those cabinets properly. The right kitchen base cabinet dimensions will help you make one portion of your map. The right upper cabinet dimensions will help you with the rest. You must carefully measure the sizes of everything, so you know just how much space you have in your kitchen. Once you know the length of the walls, you’ll be able to map out just which kitchen cabinets you want to put together to fill in that space.

Make sure you map things out based on which cabinets you’ll be able to use the most. Kitchen cabinet depth is pretty well set, but if you find you need something other than a typical cabinet depth, you may want to look at custom options. The width is going to be the primary concern because that’s where you have some flexibility. Suppose you want two 18” cabinets or one 36” cabinet that’s going to be up to you. It’s also going to be entirely up to you what style of cabinets those might be. After all, there are many choices.

Drawing things out will be the best way to figure out what you have and what you want to do. You have to create a sketch that details the size of your space and then make sure you have all the correct measurements for your cabinets as well. If you already have cabinets, you can simply replace them with something of the same size. If you don’t, you can create an entirely new design. Decide what type of cabinets you need, like a corner or drawers. Once you know what you’re looking for, you’ll be able to create the flow of cabinets that are most conducive to what you need.

 

 

Setting Up the Kitchen

Once you’ve got an idea of what cabinet sizes you need, it’s time to start thinking about the other features of those cabinets. Don’t miss out on all the different styles that are out there. You’ll see plenty of different colors that are either natural or not. There are basic stain options and specialized paints and stains. You’ll also see several stain options that are basic or specialized. There is also a range of different options in kitchen and bath doors, hardware, storage, baking, and other accessories.

You can choose which options you would like to put into your kitchen, and you can mix and match however you like. That’s going to be an important aspect because it means your kitchen will look just the way you want it to. You won’t have to sacrifice anything because you will get fully what you’re looking for. The balance of everything is right there for you, unlike if you order something stock off the shelves. It’s all about knowing what you want and working from there to create the ideal design.

The kitchen cabinet depth that you choose is going to be extremely important. Balance the rest of your appliances with the standard kitchen cabinet depth that fits best. Though one will be the most common, it doesn’t mean it will work if you have larger appliances. Standard base cabinet depth may not work out properly for you. But going with something a little bit larger will be a great way to keep your cabinets in line with your appliances and create a smooth transition. The only thing you need to do is make sure you look at all of your options and work your way from there. You’ll have a beautiful and very functional kitchen that you can enjoy for as long as you want. What could be better than that?

 

Explore Cabinets

 

Kitchen Cabinet Sizes and Their Cost

When you’re looking at standard style cabinets with standard cabinet depth, you’re going to have the lowest costs. That’s because anything you can purchase directly from the store is going to be easy. You’re going to have many benefits but this low cost, coming in at as little as $60 per linear foot. These in-stock cabinets may end up close to $200 per linear foot; however, you want to get the best materials and the best style. This is all going to be extremely important when you’re deciding what you want.

When it comes to high-quality cabinets, you could be looking at around $200 to $850 per linear foot if you want something considered semi-custom. A semi-custom unit will give you many options but doesn’t allow you to personalize the unit completely. You’ll be able to pick some things, like sizes, to a smaller degree than with stock cabinets or the decorative aspects that come along with the cabinets. These are important for upper and base cabinets, so make sure you’re looking at all of them and which companies or stores will allow you to use semi-custom options.

If you want to get precisely what kitchen cabinet you’re looking for and nothing else, you should expect to spend quite a bit more money. That’s because custom cabinets are upwards of $700 per linear foot and could go as high as $1,400 per linear foot. This means that you’re going to spend a lot of money, but you’re also going to have a lot of benefits. After all, custom cabinets allow you to choose absolutely everything that you want in the exact way that you want it. You don’t have to worry about standard sizes or less than ideal designs. You can design it all yourself for the perfect look and feel.

 

Kitchen cabinet dimensions and sizes guide. Explore First.